| Technology |
Electro photographic (LED) with OPC drum |
| Resolution |
600 dpi |
| Print Speed |
6 metres per minute in any print mode |
| ROWE EROGOTEC |
New smoothly-running drawer system, designed after ergonomic aspects, with parallel adjustment and buffered stoppers |
| Automatic detection of roll width (ADDITIONAL EQUIPMENT) |
Automatically recognises the width of a new roll after it was input |
| ROWE DISPLAY OF REMAINING LENGTH |
Automatically informs about the available remaining length of each roll |
| ROWE PAPER INPUT SYSTEM |
Innovative media feed system without roll core - easiest handling (handicapped accessible) |
| Number of automatic rolls |
2 automatic rolls and single sheet feed |
| Modular construction principle (ADDITIONAL EQUIPMENT) |
3rd and 4th roll can be retrofit on site |
| ROWE ECO PRESS |
New fusing technology:
Optimal fusing quality combined with minimum energy consumption (Energy Star certified) |
| ROWE ENERGY SYSTEM |
Meets the criteria of the Energy Star |
| ROWE DATA SAFE |
Integrated data saving system |
| ROWE SILENCE SYSTEM |
Exemplarily silent, eligible for operation right next to the workplace |
| ROWE ECO TONER SYSTEM |
Examined regarding harmful substances and certified by LGA (non-toxic) |
| New toner management: Highest print quality with lines, grey areas and black areas |
| Clean and closed toner system, recyclable cartridges |
| Output formats |
DIN A4-DIN A0 and 914mm width, up to 32m length (excess lengths on demand), with very quick change of the roll in access |
| Material types |
Plain, transparent, recycling,
fluorescent and coloured paper,
films and vellum; up to 110g per m²; details see ROWE material catalogue |
| Output, backside |
Integrated receiving tray for up to 100 prints A4-A0 |
| Output, front side (Receiving tray for output at the back is not applicable) (ADDITIONAL EQUIPMENT) |
Comfortable stacking facility for up to 100 prints A4-A0 |
| ROWE STACKER (ADDITIONAL EQUIPMENT) |
Stacker for high printing volumes of A4-A0
Dimensions: W/D/H in mm 1166/1310/678 |
| Noise development in db |
Low-power mode - Not measurable |
| Operation - 52 db |
| Power consumption in Watt |
Low-power mode - 23 W |
| Operation - 1250 W |
| Power connection |
230 V, 50/60 Hz |
| Ozone concentration |
The following values considerably remain below the limit values regulated by law:
< 0,001 ppm average value,
< 0,002 ppm peak value |
| Platform |
ROWE Controller with integrated operating system file spooling |
| File Formats |
HPGL, HPGL2, HPRTL, TIFF G2/G3/G4, Packed Bits, CALS 1 and 2, Calcomp 906/907, |
| PostScript Level 2 and 3, PDF (Additional Equipment) |
| Interfaces |
Standard: Ethernet 10/100/1000 MBit/s with RJ45. Optional: other network cards TCP/IP |
| Network protocols |
TCP/IP, NETBEUI (SMB), Novell (IPX/SPX), FTP, LPD; other protocols are supported via an external print server |
| Functions |
Automatic detection of data format |
| Automatic roll selection and change over |
| Print manipulation: Rotating, positioning and scaling automatic |
| File spooling on the controller |
| Set memory: send once, process once, print multiply |
| Concurrent receiving, processing and printing of digital jobs |
| ROWE PRINT MASTER |
Multiuser, job transmission software with direct feedback from the device, web-based
Printer configuration
Preview function
Saving and recalling of jobs
Repeated printing of jobs |
| ROWE PRINT MASTER LT (ADDITIONAL EQUIPMENT) |
Easy and quick: The job transmission software with reduced scope |
| ROWE PRINT SPECIALS (ADDITIONAL EQUIPMENT) |
Software application for editing stamps, margin texts, cover sheets, folding programmes |
| ROWE COST CONTROL |
Comprehensive cost centre management |
| Ambient conditions |
Recommended temperature: 20-27°C
Recommended air humidity 30-60% |
| |
BACK OUTPUT |
FRONT OUTPUT |
| Dimensions width/depth/height in MM |
1375/700/960 |
1375/750/1175 |
| Weight in kg, with 2 rolls |
279 Kg |
284 Kg |
| Weight 2-roll-drawer |
58 Kg |
58 Kg |
